450 ft.-lbs. of max. torque 3 speed ranges: 0-300, 0-600, 0-1700 RPM 2-pc. motor with dual ball bearings for longer motor life 16 torque settings plus drill mode Ergonomic design Product DescriptionThe Makita Reconditioned 14.4V Cordless Drill/Driver delivers 450 ft.-lbs. of max. torque for heavy-duty drilling and fastening applications. Works with either Ni-MH or Ni-Cd [...]
Thursday, January 27, 2011
Balanced mid-handle design increases the overall comfort of the drill and the user’s control when using the drill Fan cooled motor contributes to a longer life of the drill Keyless chuck for quick and easy bit changes 2 speeds switch with forward/reverse – Low for control when screwdriving; high for drilling Includes: 7.2-Volt drill with [...]
Wednesday, January 19, 2011
We recently ran across a customer who wanted to drill a hole in an “air cylinder” with 9000 PSI gaseous material inside it. Our main concern was that the rush of high pressure “air” and any chips or other material from inside the cylinder would become projectiles and take out the front bearing on our [...]
Sunday, December 12, 2010
AskWoodman.com This is a short video showing a quick tip for woodworkers as well as metal workers. Have you ever lost the drill chuck key to your drill? Here’s an easy way to loosen or tighten a drill bit in any keyed chuck drill without a key. All you need is a slip joint pliers [...]
Thursday, October 28, 2010
I have a solution for you and your missing drill chuck key that will keep you working even if you lose the key. Sure we could all say that we could be better organized, but how about a solution that works for the rest of us who forget to be organized? Subscribe and check out [...]
Tuesday, October 19, 2010
STANDARD CATOLOG SPECIFICATIONS. MODEL 1150 22″X20″ TABLE JACOBS CHUCK #14N – UP TO 1/2″ SHAFT 1 HP MOTOR – 230V 10-16″ ADJUSTABLE FROM SPINDLE TO TABLE 270 – 3000 RPM SPEED MOTOR AND CONTROLS 37″FB x 22″LR x 76″H Approx 300lbs Related Blogs Hybrid SUV Audi Q5 hybrid Facelift Los Angeles Motor Show – Online [...]
Monday, September 27, 2010
Demonstrates use and installation of drill chuck adapter for the Strong Arm 5 drill press. Applies to both 3/8″ adapter and 1/2″ adapter. Related Blogs Pint – how do you erase the chuck on a makita 6233d drill? | For Stone Fabricators and Technicians Video: Strong Arm Steady feat. Jelly Roll – “Make Me Feel” [...]
Wednesday, September 22, 2010
This short video shows how to remove a standard chuck from a drill press with a Morse Taper drive tang. This particular drill press is a Grizzly G7944 which is the same as the following units in many ways. DAYTON 3Z917E, 3Z918, 3Z918F, 3Z993, 5Z146 DELTA DP400 DELTA 17-900, 17-901 DELTA 17-950L, 17-959 GRAINGER 3Z917E, [...]
